Workshop tool
Casio W-221H Customizer
Tools & parts for this build
All tools & parts →Start with a plain-paper test. Choose your final material when you’re happy with the fit.
Glossy photo paper
For opaque, full-colour artwork.
Transparency film
For translucent artwork. Match the film to your printer.
Cutting & installation tools
- Hobby Knife — trim the printed artwork.
- Watch Repair Screwdriver Set — use a tip that fits your caseback screws.
- Precision Tweezers — handle small parts.
- Rocket dust blower — clear dust before reassembly.
Some links are affiliate links. Purchases may earn me a commission at no extra cost to you. Use supplies you already own where suitable.
The W-221H LCD layout is approximate and shown for preview only. The print contains your artwork without the watch display.
Before installing the background: print a paper test at actual size, trim gradually, and check that it lies flat in the LCD carrier. The artwork area is 25.3 × 24.5 mm (width × height).
