Workshop tool
Casio F-91W Customizer
Tools & parts for this build
All tools & parts →Start with a plain-paper test. Choose your final material when you’re happy with the fit.
For opaque, full-colour artwork.
For translucent artwork. Match the film to your printer.
Cutting & installation tools
- Hobby Knife — trim the printed artwork.
- Watch Repair Screwdriver Set — use a tip that fits your caseback screws.
- Precision Tweezers — handle small parts.
- Rocket dust blower — clear dust before reassembly.
Trying a reflective background? Pair film with Adhesive metallic tape and follow the reflective background guide.
Some links are affiliate links. Purchases may earn me a commission at no extra cost to you. Use supplies you already own where suitable.
LCD digits are shown for preview only. The print contains your artwork without the watch display.
Before installing the background: print a paper test at actual size, trim gradually, and check that it lies flat in the LCD carrier. The artwork area is 21 × 11 mm. See the F-91W background mod guide for the installation steps and precautions.
